INDUSTRIAL SSD 128GB 2.5" IDE SLC FLASH WIDE TEMP
In stock
SKU
INDUSTRIAL SSD 128GB 2.5" IDE SLC FLASH WIDE TEMP
$1,238.75
Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.
Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.
| Compatibility | ATAPI-5 Standard | ||||||
| Flash Technology | NAND Type Flash Memory Base | ||||||
| Flash Capacity | 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB, 16GB and 32GB | ||||||
| Form factor | 2.5inch or 1.8inch | ||||||
| Connector | Standard 44pin male IDE connector | ||||||
| Master/Slave | Setup By Jumper | ||||||
| System Performance | |||||||
| Data Transfer Mode | PIO Mode 4 / UDMA Mode 4 | ||||||
| Sequential Read |
|
||||||
| Sequential Write |
|
||||||
| Average Access Time | 1ms | ||||||
| Environmental Specification | |||||||
| Standard Temperature |
|
||||||
| Wide Temperature |
|
||||||
| Humidity | 5~95% non-condensing | ||||||
| Vibration | 20G peak to peak | ||||||
| Shock | 1500 G | ||||||
| Reliability | |||||||
| MTBF (Mean Time Between Failure) | > 2,000,000 hours | ||||||
| Error Code Correction | 4 bits ECC Code | ||||||
| Endurance | Greater than 1,000,000 cycles logically contributed by wear-leveling and advanced bad sector management algorithms. | ||||||
| Power Consumption | |||||||
| Power Requirements | +5V ± 10% | ||||||
| Read | 85 mA (typ.) | ||||||
| Write | 90 mA (typ.) | ||||||
| Standby Mode | 2 mA (typ.) | ||||||